image_not_found

Digital Hydraulic Bench (SMT-FM-100D)

The Digital Hydraulic Bench (SMT-FM-100D) is a reliable unit designed for use in fluid mechanics and water supply laboratories. It provides a controlled flow of water to a wide range of experimental modules, which can be connected separately as required. The bench operates on a closed water circuit that includes a stainless-steel storage tank, a powerful pump, and an elevated measuring tank where the returning water is collected.

Its structure is built on a strong steel frame finished with powder-coated paint to resist wear, scratches, and corrosion. The upper tub is made from fiberglass, providing strength while remaining lightweight, and the lower tank is stainless steel, ensuring durability and long service life. This combination of materials makes the unit both sturdy and reliable for continuous laboratory use.

Water flow can be adjusted easily through a hand-operated valve, while a digital LCD display allows real-time monitoring of flow rate. An electrical control box is provided with a pump switch and circuit protection to ensure safe operation. Optional software is also available for computer-based monitoring and control, making the bench a versatile and user-friendly system for a variety of laboratory experiments.

Pump:

  • Power consumption: 370W/745W.
  • Max. flow rate: 50L/min.
  • Max. head: 35m.
  • Max Pressure: 500mBar

Storage tank:

  • Capacity: 165L.

Measuring tank:

  • At large volumetric flow rates: 40L.
  • At small volumetric flow rates: 10L.

Flume:

  • LxWxH: 530x150x180mm.

Measuring beaker with scale for very small volumetric Measurement.

Flow rate Measurement:

  • Electronic sensor and LCD Display
  • Display: L/min
  • Resolution: 0.1L/min

Stopwatch.

  • Measuring range: 0…9h 59min 59sec.

230V, 50Hz, 1 phase.

230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase.

UL/CSA optional.

LxWxH: 1230x790x1070mm.

Weight: approx. 70kg.

Accessories (Included):

  • All necessary Flexible pipes and fittings.
  • Stop Watch
  • Beakers 1000mL Quantity= 02
  • Instruction Manual

Operating Conditions:

  • Laboratory Temperature: 5oC to 40oC

Note:

  • This product may produce small splashes of water in use, so you must use it at a safe distance from electrical supplies. ESOLS recommends approximately 2.0 m.

Available Optional Modules:

  • Bernoulli Theorem (SMT-FM-01)
  • Metacentric Height SMT-FM-02)
  • Energy Losses in Bends and Fittings (SMT-FM-03)
  • Hydrostatic Pressure (SMT-FM-04)
  • Orifice Discharge Apparatus (SMT-FM-05)
  • Impact of Jet (SMT-FM-06)
  • Flow Over Weirs and Notches (SMT-FM07A)
  • Pipe Friction Apparatus (SMT-FM-08)
  • Osborne Reynolds Demonstration Vertical Tube (SMT-FM-09A)
  • Osborne Reynolds Demonstration Horizontal Tube (SMT-FM-09B)
  • Hydraulic Ram Pump (SMT-FM-10)
  • Orifice and Jet flow Apparatus (SMT-FM-11)
  • Flow Visualisation Apparatus (SMT-FM-12)
  • Free and Forced Vortex (SMT-FM-13)
  • Demonstration Pelton Turbine (SMT-FM-14)
  • Demonstration Francis Turbine (SMT-FM-15)
  • Demonstration Kaplan Turbine (SMT-FM-16)
  • Demonstration Reaction Turbine (SMT-FM-17)
  • Pitot Tube Apparatus (SMT-FM-19)
  • Flow Measurement Apparatus (SMT-FM-20)
  • Fluid Friction Measurement Apparatus (SMT-FM-24)
  • Pipe Surge and Water Hammer Apparatus (SMT-FM-27)
  • Cavitation Apparatus (SMT-FM-29)
  • Base module for supplying experimental units in fluid mechanics.
  • Electronics flow meter and LCD Display for better display and accurate results.
  • Closed water circuit with storage tank, pump and measuring tank.
  • Measuring tank divided in two for volumetric flow rate measurements.
  • Measuring beaker with scale for very small volumetric flow rates.
  • Measurement of volumetric flow rates by using a stopwatch.
  • Work surface with integrated flume for experiments with weirs.
  • Work surface with inside edge for safe placement of the accessory and for collecting the dripping water.
  • Storage tank made of stainless steel and measuring tank made of GRP.
  • Lockable wheels for mobility with stability.